Parker Crank Benders

Crank Bender Model 424

Rig-Tech rents Parker's portable Model 424 Crank-Operated Bender will bend tube from size 4 (1/4”) through size 24 (1 1/2”) and 6mm through 38mm. This portable bender can be held in a vise or bench mounted using a bench mounting adapter. Exactol benders are designed with a worm-gear drive with a 60 to 1 gear ratio to allow accurate bending with minimum effort.

Features/Benefits:
• Will bend aluminum, copper, annealed steel and annealed stainless steel without kinks or wrinkles.
• Small, large and close bend radius blocks are available to meet any bending requirement.
• The easy crank operation permits continuous production without excessive operator fatigue, and it good for use in tube fabrication shops, in the field or in factory maintenance departments.

Crank Bender Model 412

Parker's portable Model 412 Crank-Operated Bender will bend tube from size 4 (1/4”) through size 12 (3/4”) and 6mm through 20mm.

This portable bender can be held in a vise or bench mounted using a bench mounting adapter. Exactol benders are designed with a worm-gear drive with a 60 to 1 gear ratio to allow accurate bending with minimum effort.

Features/Benefits:
• Will bend aluminum, copper, annealed steel and annealed stainless steel without kinks or wrinkles.
• Small, large and close bend radius blocks are available to meet any bending requirement.
• The easy crank operation permits continuous production without excessive operator fatigue, and it is good for use in tube fabrication shops, in the field, or in factory maintenance departments.